To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an AC power outlet (electrical socket).
   Turn your Brother machine on.
    
2. Press (Settings) > Network > WLAN > Setup Wizard.
    
3. When Enable WLAN? Do you want to continue? or Enable WLAN? The Wired Network I/F will be disabled. Do you want to continue? appears, select Yes to accept.
   This will start the wireless setup wizard.
    
4. The machine will search for your network and display a list of available Network Names (SSIDs).
   When a list of SSIDs appears, press the Up or Down arrow keys to select the SSID you wrote down earlier, and then press it.
    
5. Press OK.
    
6. Do one of the following:
   • If using an authentication and encryption method that requires the Network Key (Password)
     Enter the Network Key, then press OK to apply your settings.
      
   • If your authentication method is Open System and your encryption mode is None
     Go to the next step.
7. The machine tries to connect to the wireless network you have selected.
   • If your Brother machine connected successfully
     The machine's LCD displays Connected.
      
   • If the connection failed
     The machine's LCD displays an error message. Check the error message and resolve the issue.
     > Click here for more information about the recommended solution to correct the error message.